Circuit Negma

C++, C, VB.NET, PCB, Electronics, Circuit Design

Text objects filled in plot preview but not in plotted output

Posted by Circuit Negma on September 13, 2010


Created By: Hussein Nosair

Source: TrueType® text objects filled in plot preview but not in plotted output

Published date: 2005-Jun-09
ID: TS67821

Applies to:
AutoCAD® 2007
AutoCAD® 2006
AutoCAD® 2005
AutoCAD® 2004
AutoCAD® 2002
AutoCAD® 2000
AutoCAD LT® 2007
AutoCAD LT® 2006
AutoCAD LT® 2005
AutoCAD LT® 2004
AutoCAD LT® 2002
AutoCAD LT® 2000i
AutoCAD LT® 2000

Issue

A drawing contains TrueType® text objects that are displayed as filled in the plot preview. However, in the hardcopy output, the TrueType text objects are plotted as outlines and are not filled.

Solution

To ensure TrueType® text is filled when plotted, configure the following settings:

  • Set the FILL command to on.
  • Set the FILLMODE system variable to 1.
  • Set the TEXTFILL system variable to 1.
  • In the Plot dialog box, clear Hide Objects.
  • Turn off the Hideplot property of the viewport
    Note: In AutoCAD 2004, 2005, and 2006-based products, turn off Shadeplot > Hidden Property of Viewport.

If these program settings do not resolve the problem, update your Windows system printer driver.

Advertisements

Posted in AutoCad 2006 | 2 Comments »

1-Wire Development kit :: Schematic Reworked

Posted by Circuit Negma on August 27, 2010


Created By: Hussein Nosair

Update:

1. voltage Regulator :: Redesigned the Circuit [DONE]

2. LCD Connector:: [DONE]

3. ICD 2 Connector:: [DONE]

4. MCLR circuit:: [DONE]

5. DS2480B :: Serial to 1-wire line driver:: [DONE]

6. DS2450 :: 1-wire quad ADC:: [DONE]

7. Pressure Sensor :: [DONE]

8. POT:: [DONE]

9. PIC18F4520:: [DONE]

10. XTAL:: [DONE]

11. 1-wire Terminal :: [DONE]

12. 1-wire 3-pins (100 mils spacing) header :: [DONE]

Posted in Electronics, Microchip PIC | 2 Comments »

1-Wire Development kit :: Parts and Materials for PCB Production

Posted by Circuit Negma on August 13, 2010


Created By: Hussein Nosair

 

 

 

Posted in Electronics, PCB | Leave a Comment »

1-Wire Development kit :: Determine the size of the copper clad board

Posted by Circuit Negma on August 8, 2010


Created By: Hussein Nosair

The following image shows that the 1-wire development kit could fit on a 4.5” x 3.0” copper clad uncoated single side board.

Posted in Electronics, Microchip PIC | Leave a Comment »

1-wire Development Kit :: Schematic Update

Posted by Circuit Negma on August 8, 2010


Created By: Hussein Nosair

 

Update:

1. voltage Regulator :: [DONE]

2. LCD Connector:: [DONE]

3. ICD 2 Connector:: [DONE]

4. MCLR circuit:: [DONE]

5. DS2480B :: Serial to 1-wire line driver:: [DONE]

6. DS2450 :: 1-wire quad ADC:: [DONE]

7. Pressure Sensor

8. POT:: [DONE]

9. PIC18F4520:: [DONE]

10. XTAL:: [DONE]

11. 1-wire Terminal :: [DONE]

12. 1-wire 3-pins (100 mils spacing) header :: [DONE]

Posted in Electronics, Microchip PIC | Leave a Comment »

1-Wire Development Kit :: update

Posted by Circuit Negma on August 6, 2010


Created By: Hussein Nosair

Update:

1. voltage Regulator :: [DONE]

2. LCD Connector:: [DONE]

3. ICD 2 Connector:: [DONE]

4. MCLR circuit:: [DONE]

5. DS2480B :: Serial to 1-wire line driver:: [DONE]

6. DS2450 :: 1-wire quad ADC:: [DONE]

7. Pressure Sensor

8. POT:: [DONE]

9. PIC18F4520:: [DONE]

10. XTAL:: [DONE]

Posted in Electronics, Microchip PIC | Leave a Comment »

1-Wire Development Kit :: Cont.

Posted by Circuit Negma on August 6, 2010


Created By: Hussein Nosair

Update:

1. voltage Regulator :: [DONE]

2. LCD Connector:: [DONE]

3. ICD 2 Connector:: [DONE]

4. MCLR circuit:: [DONE]

5. DS2480B :: Serial to 1-wire line driver:: [DONE]

6. DS2450 :: 1-wire quad ADC:: [DONE]

7. Pressure Sensor

8. POT:: [DONE]

9. PIC18F4520:: [DONE]

10. XTAL

Posted in Electronics, Microchip PIC | 1 Comment »